Suzhou Blauberg Motoren Technology Co., Ltd. is one of the leading manufacturers and suppliers of blauberg sl-f160c-ec-02 160mm ec single inlet centrifugal blower in China. Welcome to buy bulk high quality customized products made in China here and get quotation from our factory. For price consultation, contact us.
Basic Info
| Model | SL-F160C-EC-02 | Product Type | EC Single Inlet Centrifugal Blower |
| Brand | Blauberg | Place of Origin | Germany |
| Certification | CCC, CE | Compliance | RoHS |
Rated Data
| Phase | 1~ | Rated Voltage | 230 VAC |
| Frequency | 50/60 Hz | Rated Speed | 2760 RPM |
| Maximum Input Power | 115 W | Maximum Input Current | 0.9 A |
| Sound Level | 67 dBA | Ambient Temperature | -25 to +60 deg C |
Technical Description
| Motor Type | External rotor EC motor | Motor Size | Not specified |
| Weight | Not specified | Packaging | Not specified |
| Fan Dimensions | 246.9 x 220.5 x 130 mm | Impeller Material | Metal |
| Number of Blades | Not specified | Air Flow Direction | Not specified |
| Rotation | Clockwise, viewed toward rotor | Rotor Surface | Plastic spraying |
| Protection Class | IP55 | Insulation Class | Class B |
| Duty / Bearing | S1 / Ball bearing | Installation Position | Any |
| Storage Temperature | -40 to +80 deg C | Humidity | 5%-90% RH; storage 5%-95% RH |
| Technical Features | 10 VDC output; 0-10 VDC/PWM control; locked rotor, thermal, over/undervoltage, overcurrent and soft start protection | ||
| Cable Length | 500+/-20 mm | Dielectric Strength | Not specified |
Product Application
| 1 | Charging Column | 9 | Equipment Cooling Project |
| 2 | Kitchen Smoke Exhaust System | 10 | Ventilation Unit Project |
| 3 | FFU Project | 11 | AHU Project |
| 4 | Computer Room Cooling | 12 | Air Purifier Project |
| 5 | Rail Transit Air-Conditioning | 13 | Heat Exchanger Project |
| 6 | Electrical Appliances | 14 | Telecom Container Project |
| 7 | FanGrid Project | 15 | Data Center Cooling Project |
| 8 | Ventilation Equipment Project | 16 | Industrial Cooling System |
Air Performance
Overall Dimensions
Electrical Connection
| Terminal | Wire / Function | Description |
|---|---|---|
| PE | Green/Yellow | Protective Earth |
| U1 / L | Brown | Live |
| U2 / N | Blue | Neutral |
| U4 / +10V | Red | External output +10VDC |
| U5 / 0-10V PWM | Yellow | Speed control, maximum 10V |
| U6 / FG | White | Speed feedback, 2 pulses/revolution |
| U7 / GND | Blue | Signal ground |
Note
- The power line and control line of the fan should be connected in strict accordance with the wiring diagram to prevent the fan from burning out.
- Do not connect the white signal wire directly to the red signal wire or the external DC power supply.
- If the fan does not work after starting, check whether the input voltage of the speed regulation is improperly connected. To prevent hand or other personal injury caused by sudden start of the fan, do not touch the impeller or rotor after electrifying.
- It takes a few seconds for the fan to start after power on. To prevent personal injury, do not touch the impeller or rotor while energized or operating at low speed.
- Persons who lack physical, sensory or mental capacity, or relevant experience and knowledge, must use the product under supervision or guidance. Keep children away from the fan.
- Do not pull the power cord hard. If the power cord is damaged, it must be replaced by the manufacturer to avoid electric shock accidents.
- As a part of the fan, the motor cannot be used alone without an impeller or load.
- After unpacking, repack the product if it must be stored. Store it in a clean, well-ventilated warehouse at -40°C to +80°C, relative humidity not exceeding 95%, with no corrosive gases in the air, and at least 15 cm above the ground.
- Please read this specification carefully before installing and using the fan.
Download
SL-F160C-EC-02 Product Specification.pdf
Hot Tags: blauberg sl-f160c-ec-02 160mm ec single inlet centrifugal blower, China blauberg sl-f160c-ec-02 160mm ec single inlet centrifugal blower manufacturers, suppliers, factory
