Suzhou Blauberg Motoren Technology Co., Ltd. is one of the leading manufacturers and suppliers of blauberg gc-b250b-ec-m2 250mm ec backward-curved centrifugal fan in China. Welcome to buy bulk high quality customized products made in China here and get quotation from our factory. For price consultation, contact us.
The Blauberg GC-B250B-EC-M2 is a 115 VAC EC backward-curved centrifugal fan with a plastic impeller and IP55 protection. It operates at a rated speed of 2180 RPM and supports 0-10 V and PWM speed control.
| Model | GC-B250B-EC-M2 | Product Type | EC Backward-Curved Centrifugal Fan |
| Phase | 1~ | Rated Voltage | 115 VAC |
| Frequency | 50/60 Hz | Rated Speed | 2180 RPM |
| Max. Input Power | 115 W | Max. Input Current | 1.8 A |
| Sound Level | 68 dB(A) | Ambient Temperature | -25 deg C to +60 deg C |
| Certification | CCC, CE | Release Date | 26 October 2022 |
| Dimensions | 300 x 300 x 135.5 mm | Impeller Material | Plastic |
| Rotation | Clockwise, viewed from rotor end | Rotor Surface | Powder coating |
| Degree of Protection | IP55 | Insulation Class | Class B |
| Duty | S1 | Bearing | Ball bearings |
| Motor Type | External-rotor EC motor | Operating Humidity | 5%-90% RH |
| Motor Protection | Locked-rotor, thermal, overvoltage, undervoltage and overcurrent protection; soft start | Axial / Radial Runout | Not more than 0.5 mm |
| Lead Length | 500+/-20 mm | Conformity | RoHS |
| 1 | Charging Column | 9 | Equipment Cooling Project |
| 2 | Kitchen Smoke Exhaust System | 10 | Ventilation Unit Project |
| 3 | FFU Project | 11 | AHU Project |
| 4 | Computer Room Cooling | 12 | Air Purifier Project |
| 5 | Rail Transit Air-Conditioning | 13 | Heat Exchanger Project |
| 6 | Electrical Appliances | 14 | Telecom Container Project |
| 7 | FanGrid Project | 15 | Data Center Cooling Project |
| 8 | Ventilation Equipment Project | 16 | Industrial Cooling System |
The specification provides the performance curve with airflow Q in m3/h and pressure rise in Pa. The displayed curve covers approximately 0-1200 m3/h and 0-700 Pa under the measuring conditions of the specification.
| Lead | Connection | Designation | Color | Function |
|---|---|---|---|---|
| Power Cable | PE | PE | Yellow / Green | Protective earth |
| Power Cable | U1 | L | Brown | Line |
| Power Cable | U2 | N | Blue | Neutral |
| Control Cable | U4 | +10V | Red | Control voltage +10 V |
| Control Cable | U5 | 0-10 V speed input | Yellow | 0-10 V / PWM speed input |
| Control Cable | U6 | FG | White | Speed output: 2 pulses per revolution |
| Control Cable | U7 | GND | Blue | Control ground |
Note
Connect the power and control lines strictly according to the wiring diagram to prevent damage to the fan.
Do not connect the white signal wire directly to the red signal wire or an external DC power supply.
If the fan does not operate after power-on, check the speed-control input voltage and wiring. To prevent injury from sudden start-up, do not touch the impeller or rotor after power is applied.
The fan takes several seconds to start after power-on. Do not touch the impeller or rotor while energized or operating at low speed.
Persons lacking physical, mental or sensory capability, or suitable practical experience, must not use the fan without supervision by a person responsible for safety. Keep the fan away from children.
If the power cable is damaged, it must be replaced by the manufacturer.
The motor is part of the fan and must not be operated independently without an impeller or load.
Repack the product for storage. Store it in a clean, ventilated warehouse at -40 deg C to +80 deg C, relative humidity not exceeding 95%, without corrosive gases and at least 15 cm above the floor.
Read this technical specification carefully before use.
GC-B250B-EC-M2_Technical_Specification.pdf
Hot Tags: blauberg gc-b250b-ec-m2 250mm ec backward-curved centrifugal fan, China blauberg gc-b250b-ec-m2 250mm ec backward-curved centrifugal fan manufacturers, suppliers, factory
