Blauberg BL-A400C-EC-07 400mm EC Axial Fan

Blauberg BL-A400C-EC-07 400mm EC Axial Fan

Model: BL-A400C-EC-07
Rated voltage: 230 VAC, 50/60 Hz
Rated speed: 1250 RPM
Maximum input power: 192 W; maximum input current: 1.1 A
Send Inquiry

MOQ:100 pcs· Standard lead time:15-25 days· Engineering sample.7-10 datys

Description
Technical Parameters

Suzhou Blauberg Motoren Technology Co., Ltd. is one of the leading manufacturers and suppliers of blauberg bl-a400c-ec-07 400mm ec axial fan in China. Welcome to buy bulk high quality customized products made in China here and get quotation from our factory. For price consultation, contact us.

 

BL-A400C-EC-07 is a 400 mm EC axial fan driven by a 230 VAC single-phase external-rotor EC motor. It provides 0-10 V / PWM speed control and tachometer signal feedback.

Basic Info

Model BL-A400C-EC-07 Fan Type EC Axial Fan
Nominal Voltage 230 VAC Voltage Range 184-276 VAC
Phase Single phase (1~) Frequency 50/60 Hz
Nominal Speed 1250 +/- 5% RPM Operating Mode S1
Max. Input Power 192 W Max. Input Current 1.1 A
Sound Level 65 dB(A) Certification CCC, CE, RoHS

Technical Description

Dimensions 400 x 400 x 100 mm Motor Type External-rotor EC motor
Impeller PP+GF, 5 blades Bearing Ball bearing
Airflow Axial Rotation Counterclockwise, viewed toward rotor
Protection Rating IP55 Insulation Class B
Ambient Temperature -25°C to +60°C Storage Temperature -40°C to +80°C
Humidity 5%-90% RH Cable Length 500 +/- 20 mm
Protection Functions Locked-rotor, thermal, high-/low-voltage, overcurrent protection and soft start

Product Application

1 Ventilation equipment 9 Equipment cooling projects
2 Air handling units 10 Cabinet ventilation
3 Industrial cooling 11 Control cabinets
4 HVAC systems 12 Heat exchanger equipment

Air Performance

BL-A400C-EC-07 air performance curve

Air performance was measured according to AMCA 210 / GB 1236 installation category A. Values apply under the specified measuring conditions and may vary with the installation. For deviations from the standard configuration, verify the parameters on the installed unit.

Overal Dimmensions

BL-A400C-EC-07 overall dimensions

Overall fan dimensions: 400 x 400 x 100 mm. Dimensional values are shown in millimetres.

Electrical Connection

BL-A400C-EC-07 electrical connection

Line Terminal Designation Colour Function
Power Line PE PE Green/Yellow Protective earth
U1 L Brown Live wire
U2 N Blue Neutral wire
Control Line U4 +10 V Red 10 VDC output
U5 Speed control Yellow 0-10 V / PWM input
U6 Signal feedback White Tach output, 5 pulses per revolution
U7 GND Blue Control reference ground

Note

Connect the power and control lines strictly according to the wiring diagram.

Do not connect the white signal wire directly to the red signal wire or an external DC power supply.

If the fan does not start, check the speed-control input voltage and wiring.

The fan takes several seconds to start after power-on; do not touch the impeller or rotor while energized.

Check that the motor is securely installed before switching on power.

Do not pull the power cord; a damaged cord must be replaced by the manufacturer.

Do not drop or strike the motor.

Do not flush the motor.

Consult Blauberg before using the product outside the agreed operating conditions.

The motor casing may remain hot after operation; take precautions against burns.

Keep the casing and equipment free of debris.

Before installation and operation, turn the rotor by hand to confirm that it moves freely.

The motor must not be operated without an impeller or load.

Store repackaged at -40°C to +80°C, no more than 95% RH, in a clean ventilated non-corrosive warehouse at least 15 cm above the floor.

Install out of reach of children.

The final interpretation of this specification belongs to Blauberg.

Life and maintenance, warranty

Design life is 50,000 hours, limited by ball-bearing life at 40°C; actual life depends on operating conditions.

Clean and maintain the fan every 3-6 months according to the environment.

The complete fan carries a two-year warranty from delivery for failures caused by product quality; improper disassembly, handling, human damage, natural disasters and force majeure are excluded.

Download

BL-A400C-EC-07 Product Specification.pdf

 

Hot Tags: blauberg bl-a400c-ec-07 400mm ec axial fan, China blauberg bl-a400c-ec-07 400mm ec axial fan manufacturers, suppliers, factory

Send Inquiry
Get in touch
Let's engineer your air solution.

Complete the form and our engineering team will contact you shortly.

bg